Photonfocus
MV4-D1280-L01-3D07-GT-S3
- Up to 65600 profiles/s @ 1280 x 11 resolution
- Detection of up to 4 peaks in a single scan
- High reliability and accuracy of 3D reconstruction, due to the non-linear interpolation technique used in the detection algorithm
- Laser line detection with up to 1/64 sub pixel accuracy
- Linear Mode / multiple slope (High Dynamic Range)
- Configurable region of interest (ROI)
- Temperature monitoring of camera
- Low trigger delay and low trigger jitter
- Extended trigger input and strobe output functionality
- 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
- 3x Isolated outputs (2x open drain, 1x TTL highspeed)
- Free GUI available (PF 3D Suite) for an easy system set up and visualisation of 3D scans
The MV4-D1280-L01-3D07-GT (LUX1310) 3D CMOS cameras were developed for high triangulation rates. To achieve this, the LUXIMA CMOS image sensor LUX1310—which has been optimized for high frame rates and high sensitivity—was combined with two robust algorithms for determining the triangulation line within the camera’s FPGA.
Interface
Model
Sensor
Accessories
▾
▾
Data / Specifications
Interface
10gige
Application
Lowlight, 3d
Pixel clock
80 MHz
Greyscale resolution
8bit
Shutter
global
Performance curve
Linear
Trigger Modes
Free running, Ext trigger, Sw trigger
Exposure time range
10µs – 186ms
Fixed Pattern Noise
< 1DN RMS @ 8Bit
Analog Gain
no
Digital Gain
0.1 to 15.99 (FineGain)
Operating temperature
0°C ... 50°C / 20 ... 80 %
Storage temperature / moisture
-25°C ... 60°C / 20 ... 95 %
Power Supply
PoE (IEEE 802.3bt standard Class 4) or Wall adapter (+12VDC (-10%) ... +24VDC (+10%))
Power Consumption
<16.9W
Lens Mount
C mount
I/O Inputs
4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL)
I/O Outputs
3x Isolated outputs (2x open drain, 1x TTL highspeed)
Connector I/O (Power)
17-pol. M12
Connector Interface
X-coded M12
Dimensions
59 x 59 x 103.2 mm3
Mass
465g
Conformity
Ce, Rohs, Weee
IP Code
IP40
Sensor Model
LUX1310
Technology
CMOS
Resolution
1280 x 1024
Pixel size
6.6µm x 6.6µm
Optical Diagonal
10.82mm
Active Area
8.45mm x 6.76mm
Dark Current
41100e-/s
Readout noise
25e-
Full capacity
17ke- / 130:1
Dynamic Range
57dB
Spectral range
VIS
Responsivity
Monochrome: 994 x 10³ DN / (J/m²) @ 560nm / 8bit
Quantum Efficiency
Monochrome: < 54%
Optical Fill Factor
45 % (without micro lenses)
Sensor Shutter
Global Shutter
Downloads
Data Sheet
| MV4-D1280-L01-3D07-GT-S3 Technical Specifications (PDF) |
Frame rate calculator
Camera specifications
Pixel clock:
80 MHz
Camera taps:
2
Exposure:
0.01-186 ms
Width:
32-1280 pixel
Height:
11-1024 pixel
Max. frame rate:
65600 fps
Result
Frame time
–
ms
Frame rate
–
fps
Limited by the camera's maximum frame rate.
Depending on the configuration, the actual frame rate may differ from this calculated value.
Related Products
- Type Cabel
- Length 1.5m
- Connectors M12 A-coded
- Compatible series MV4, MV8
- Item No. 704.090.070
- Type Cabel
- Length 3m
- Connectors M12 A-coded
- Compatible series MV4, MV8
- Item No. 704.090.071
- Type Cabel
- Length 5m
- Connectors M12 A-coded
- Compatible series MV4, MV8
- Item No. 704.090.072
- Type Power Supply
- Connectors 17-pin
- Compatible series MV4, MV8
- Item No. 705.020.007